New Technique

I had this idea the other day for a way to incorporate carving into my segmented turnings. I didn't want to build a whole new piece to try this out on for fear that I might not like it, so I used an old dish that I've done some color sampling with...

I'm really diggin it! There is some great depth added to the overall look and now I can't wait to put together a new hollow vessel and try this out full scale! I have a couple other ideas on how I can work with this technique in other ways too...

what are your thoughts?

A Segmented Hollow Vessel - Turning

I'd like to start off and say to anyone that wants to turn a hollow vessel... go get a hollowing tool! Using a gouge, scraper and skew I was able to get the results I was looking for, but I believe a hollowing tool would have been WAY easier!

I did turn the bottom of the inside before I finished doing the glue-up. And it's a good thing too, I never would have been able to get it done well otherwise.

I used thin CA to strengthen the foot and that is what is giving the wet effect.

I need to do some sanding now. Sanding the inside is going to be a little tricky, I haven't quite figured how I'm going to do that yet!

I am happy that I've acheived the overall shape I was going for.

A Segmented Hollow Vessel - The Glue-Up

I know this is kind of short and sweet, but i needed to find something to do while I wait for glue to dry! As of this morning I have all 20 segmented rings glued. I'm now working on gluing the rings together to form the hollow vessel blank.

...and since this is such a short little status update, here's another picture to give you an idea of where this piece is going.

yes, you are seeing it right, there is going to be a big hole on one side.

A Segmented Hollow Vessel - The Beginning

What is a segmented hollow vessel? Essentially a segmented hollow vessel is a form of vase without the intention of holding anything. It's an art piece.

I have been working on various design's to follow up my Segmented Abstract Model, Flower, for several months now. I've got a few different designs that I would like to pull together at some point. Recently I came up with a design that felt just right. I knew it was time to make it happen.

With all the sketching done, it was time to make some saw dust and cut some segments. I started the segment cutting yesterday and finished up today. I've got a couple days off from my job and hope to get most of the gluing done before I go back.

The vessel will be six inches high and six inches in diameter and will include 235 segments. Here's a sneak peek...

First Bottle Stoppers of 2011

With the Tung oil and wax finish applied, my first bottle stoppers of 2011 are complete!

2011-001:
151 segments. Made of Mahogany, Brazilian Cherry, Oak, Bloodwood and Walnut.



2011-002:
131 segments. Made of Maple with Oak, Mahogany, Walnut, Brazilian Cherry and Bloodwood

2011-003:

151 segments. Made of Walnut with Maple, Mahogany and Cherry.

2011-004:

151 segments. Made of Mahogany with Bloodwood accents.

2011-005:

151 segments. Made of Walnut with Maple and Brazilian Cherry.

2011-006:

121 segments. Made of Maple with Brazilian Cherry, Walnut, Cherry and brass accents.

2011-007:

51 segments. Made of Mahogany, Brazilian Cherry, Walnut, Maple and Bloodwood.

2011-008:

151 segments. Made of Walnut with Maple, Mahogany and Bloodwood.

2011-009:

151 segments. Made of Walnut with Maple, Mahogany and Oak.

2011-010:

151 segments. Made of Walnut with Maple, Mahogany and Brazilian Cherry.

I'm really happy with some of these new designs and I really like the newer tung oil and wax finish. I think these new stoppers have a much warmer feel to them now.

A New Finish

With the newest set of wine bottle stoppers, I thought I would try out a new finishing technique. Rather than going with the gloss polyurethane, I'm applying two coats of tung oil followed by a buffed paste wax. Here's an example of a finished stopper.

Thoughts?

The New Series - Candy Dishes

I know I've posted a couple pictures previously, but now that I have the first 4 completed, I thought I would post them all at once. These have been tons of fun to work on and I am certainly going to be making more!

The first candy dish includes 61 segments. I stained the wood prior to applying a gloss polyurethane finish. This dish is 2-3/4" tall and has a 5" diameter.

The second candy dish uses a similar design as the first, but includes 121 segments. This candy dish was also stained prior to the gloss polyurethane finish. This dish is 2-3/4" tall and has a 4-5/8" diameter.

The third candy dish includes 81 segments. I decided to skip the stain on this dish and just apply a gloss polyurethane finish to maintain the natural color of the pine. This dish is 2-3/4" tall and has a 4-3/4" diameter.

The fourth candy dish includes 81 segments. Again I decided to not stain the wood prior to applying the gloss polyurethane finish. This dish is 2-3/4" tall and has a 5" diameter.

Part of my original goal in making these candy dishes was to help give me a better visual of how different segment sizes would look as I am designing new pieces. So far I have not been disappointed and I'm looking forward to creating new candy dishes and trying different finishing techniques to continue providing new and different designs.

Please feel free to share any thoughts!

Darryl

New Bottle Stoppers

I had a rather busy and productive night last night. I turned and sanded six new bottle stoppers today. Each one is a new design (with the exception of the one on it's side) and I'm rather pleased with how they have come out. I can't wait to get a nice glossy polyurethane finish on them!

 
 
 
 
 
 
 
 
 
 
 
 
The second one from the left even includes some brass accents. I think my favorite though is the middle one standing up.

A Candy Dish, Cutting Board and Napkin Ring walk into a bar...

ok, probably not the best set-up for a joke, but as far as a list of latest projects go I don't think it sounds too bad!

I finished the latest cutting board that was requested of me. This one is a bit of a monster too with a dimension of 13" x 21"! If it had not already been paid for, I'm sure my wife would have claimed it for her own!

Tonight I turned my forth candy dish. This one is 2-3/4" tall with a 5" diameter and includes 81 segments. I think I will apply a clear gloss finish to this one as I am also planning for candy dish #3. These have been a lot of fun to make, I'm totally making more!

I also finished a prototype of sorts... I had thought of making a segmented napkin ring. I had a chance to get that turned tonight as well.

thoughts? on any of them?

First Project of 2011

I glued up this bowl blank a while back, but since it's not a completed project until it get turned... well it's still the first project of 2011.

My third segmented candy dish. I haven't applied the polyurethane finish yet (I don't think I'm going to stain this one) so it's not completely done yet. Made of pine, there are 81 segments in this little dish.

Candy Dish - Segmented of Course!

I've finished my first segmented candy dish!

The candy dish is 2-3/4" tall with a 5" diameter and includes 61 segments. I used the "early american" stain from Minwax for color and applied several coats of wipe-on gloss polyurethane.

I like how this little dish has come out. I've got a second one nearly finished and I'm looking forward to making more!

Another Segmented Candy Dish

Here's a better picture of the candy dish from yesterday.

Today I turned another candy dish, with a similar segment pattern, that uses twice as many segments.

I was thinking that by making similar dishes with different sized segments it would help design new pieces in the future. It should give me an idea of what a design should look like with the different options. Tha's the theory anyway!

Segmented Candy Dish

I worked on the plug needed for the bottom of the "flower" today. While those pieces are drying off, I also worked on a little something different.
I had actually glued up this little segmented candy dish a while back. It seemed like a good time to work on it again. I think it looks pretty good. Should look even better when it's full of M&M's!
 

Segmented Abstract Model - "Flower"

I present to you

"Flower"

a Segmented Abstract Model

by

Darryl Masterson

I will be getting a better picture soon!

Segmented Abstract Model - Nearly Finished

That's right, it's not completely done yet, but it's certainly to the point where I can snap a picture and be happy with what I see!

I'm so close to done now that I can taste it though!

Segmented Abstract Model - Applying Polyurethane

I've now finished the fifth coat of gloss polyurethane on the base layer. I'm really excited to see the finished piece now!

but for now... here's what I've got

Segmented Abstract Model - Staining Day

Yesterday I finished sanding and staining each of the three sections of my project.

I like how the stain helps highlight each segment.
What do you think?

Segmented Abstract Model

I've spent some time in the workshop this week and have worked on my current project. I still have more work to do, but this gives a good idea of my overal design.

thoughts?

A Slow Return to the Workshop

Just two weeks ago my mother-in-law woke me up from a nap asking if I had heard anything from my parents regarding my brother being in an accident... not 10 minutes later my father confirmed my brother had died at the hospital.

My brother, Sam, was 30 years old. He had just earned his Master Electrician's License this past May.












I've tried to distract myself by working on a couple of projects in my workshop. I've had limited success.

The Sculpture - Section Two Complete

When I started turning the inside of section two I was pretty well convinced it was going to end badly with pieces all over the workshop floor... I'm happy to report it did not end that way! I'm super pumped that I was able to get this section turned without a crisis!

Here's where it stands now with section two in place.

And, as always, I would be happy to hear your thoughts!