New Sled

As I had mentioned in a previous post, my table saw died recently. One of my friends at work has been nice enough to let me borrow his to work on a few projects. To return the favor, I made him a table saw sled.



Having learned from the first sled I made, I decided I'd make this one a little more flexible. I wanted to make it so none of the great 20.5" x 32.5" space was wasted by attaching guide blocks in the middle of the sled. So I made a sub-assembly.



a couple of spring clamps hold the sub-assembly in place and now it's set to make some more segemented / laminated pen projects!



I hope he likes it as much as I do!!

Happy Birthday Nanny!

My mother-in-law had commented how much she liked the cabinet unit I made for my wife's cookie sheets, so for my mother-in-law's birthday, we decided something should be done about the cupboard in her pantry. There were a couple of"shelves" in there already, and by "shelves" I mean a couple boards that technically were holding a few things up.

So my wife and I pulled everything out of the cupboard, discussed possible solutions and took some measurements. Then I got to work.

Here's a look at what it looks like now:






I made this in three separate units (left side, center and right side) to make it a little easier to build and install. Other than building square components to go in an area that isn't square, everything went along quite smoothly. And best of all, my mother-in-law is very happy!

All three units are built with pine harvested locally by my brother-in-law. I sanded with 100 grit and then applied a BLO (Boiled Linseed Oil) finish. And here's one final picture to give a little perspective:

The Final Step

The final step of the transformation from rough piece of wood to finished piece is a healthy coat of BLO (Boiled Linseed Oil). After the assembly of part 2 of the current project, here is what our original board looks like now.

the Continued Transformation

My last post showed how a piece of pine being used in my current project looks before I start working on it.

After running the board through the planer and jointer, it then looks like this:


The planer gets rid of the nasty looking rough surface and leaves what resembles a typical looking board.

This typical looking board is then glued to another typical looking board to create a wider typical looking board. When that wider typical looking board is sanded, it looks more like this:


stay tuned as progress continues...

New Project - Teaser

One of the reasons I like this hobby is the amazing changes that my materials go through to get to the finish line.

I have a new project in the works. Here's a picture of some of the material before I get started on it.



stay tuned to what happens next. I'm pushing to get this project done for this weekend.

How Much is "Enough"?

My wife asked me this question tonight: "Don't you have enough"?

Of course she was referring to my announcement that I was headed out to see if I could get some more of that Baltic Birch scrap wood from the local furniture shop.
My answer was simple, it was: "No"

so I ask you... how much is enough when it comes to free scraps of Baltic Birch plywood? The first picture in this group is what I picked up in this trip.











I still think the answer is no...

Sharpening Jig

Since I started turning almost two years ago I’ve thought I could learn to sharpen my gouges freehand…

I can’t.

I’m also to cheap to buy one of those commercial style jigs.

Based on a design that I cannot remeber which forum I found it in (otherwise I would be happy to link and apply credit) here’s what I’ve done. I started with a little raised base (made from some of that free scrap baltic birch plywood I can’t stop collecting) and then simply added a little extension with a “V” block to allow the handle a comfortable resting place.

I was SHOCKED at how well this cleaned up my gouge. I should have done this a LONG time ago!

Kitchen Containment

I started this project quite some time ago. This past weekend I finally got it put into place. I do need to pull it down at some point to apply a stain a poly finish to make it match the other cabinets, but for now it is serving it's purpose.



The purpose is for saving my wife's life.
We had been storing her cookie sheets and cooling racks up above the little range hood / vent thing over our stove. Everything that was up there just seemed to have a way of becoming entangled like velcro, causing everything to come crashing down if you didn't use three hands to remove something!

There is peace at last!

R.I.P.

Yes there was a death today.

My little Ryobi $99 tablesaw rolled over and died tonight. I was 3/4 the way through a cut on a piece of walnut for some new cutting boards and the flash of sparks coming from the motor caught my attention!

Poor thing.

Untitled

This is something that I came up with over the weekend. The dots at the top are inlays (meaning they do not show through to the other side of the pen). The single stripe running the length of the lower barrel is also an inlay where the three shorter stripes run all the way around the pen.

Here's a picture to show the flip side of the pen.

Make that a Double

I worked on a couple of pen designs this weekend. The first is an expansion of the celtic knot done last week. This time around I went with the double knot design. I used soft maple as the accent wood on the Sapele base.

Knots - His and Hers

I like the size and feel of the cigar pen.

My wife prefers the slim line.

As I mentioned in the previous post I have made my first Celtic Knot pen. I actually made two at the same time. One Cigar and one Slimline.
his and hers

her knot

his knot

and yes, there are more in the works!

Let's Get Jiggy

I typically believe that if someone throws something away, they are doing it for a reason. I have heard also that one man's trash is another man's treasure.

I have known that there is a local furniture company about a block away from my house. I have also heard that their cut-offs are available for the taking. This past Sunday I found out what I've been missing, and I can assure you it won't happen again!!

Here is the haul I brought home Sunday

I have already begun using one of those longer strips in the back as a raised bed in my planer so I can make my thin strips used in the celtic knot pens. There are plenty more jigs and projects just waiting to come out of that pile...

Celtic Cigar

And here's my first ever celtic-knot:



I've been talking to my friend Gary about making one of these for several weeks now. The main wood used is Sapele (sent to me by Gary) and the celtic-knot is Black Walnut. I'm pretty happy with how it came out. Now it's time to expand on this design and see what else I can come up with.

Let's Go Sledding

Something I've wanted to build for a while now is a sled for my tablesaw. I talked with my friend Gary several times this week about issues he's run into in the 4 different sleds he's built. I got the runners cut to size Thursday night. Today while my wife was out with the girls, I figured it was time to get to work.

I have a round piece of 1/2" cabinet grade plywood that was given to me at a turning group meeting I had attended last winter. I thought this would be a great project to use that. I cut a portion of the circle to give me a flat spot which would become the backer board (the board I'll hang onto as I push the sled through the saw).

Then it was time to attach the runners to the base. That didn't go nearly as bad as I had expected! Once the runner were secure, I attached a short piece of Oak to the front of the sled to keep everything from moving once the sled receives it's first cut.

The second part of the project I was nervous about was attaching the backer board, as this needs to have as close to accurate placement to enable accurate 90 degree cross cuts.

Once the sled was assembled, I applied some wax to the miter slots on the table saw. A little sanding on the runners to get a good fit, it was just like Gary said... it just slides!

Thanks for the input Gary. It's got a good fit with no side to side movement.

Check it out.

(right side)

(left side)

(underside)

Now it's just a matter of adding the 45 degree supports so I can start making some pens like Gary's!!

Bistro Complete!

That's right, it's done!

I have to say I really like this project. But, I'm also glad that it's finally done!! Here's a full picture of the table. Again, the dimensions of the table are 42"high, and the top is 36"square.

Here are a couple more pictures:

I hope my friend likes it as much as I do... otherwise I'll be building some matching chairs!

Bistro Progress

I didn't get quite as much done as I had hoped for this weekend, but I did just apply the final coat of paint to the top, yeah!!

Since I'm on vacation from the real job this week, tomorrow I will tackle the base.

Prime Time

I like knots. Most people don't seem to, but I do. I think they add character to a piece of wood. Some knots are better than others though. Ideally a nice tight knot would be the best to incorporate into a project.

But sometimes, a knot that isn't so great can be fixed up. The knot on the underside of the bistro table top is the perfect example. I decided to keep this knot in the piece for the simple fact that the table is being painted and it won't be seen.

This knot had some dried and loose pieces in it. So when I first started putting the top together, I used a screwdriver to pluck out all the loose bits out of the knot. This left a nice gaping hole instead. I filled the hole with a mixture of 2-part epoxy and some wood shavings.

I didn't get a before picture (sorry), but I did snap a picture before I applied the primer so I could use this as a bit of education for myself.

I think if I were to need to do this again, I would just use straight 2-part epoxy and skip the wood shavings.

Oh and speaking of the bistro table, I got a full coat of primer on the top tonight, so here's a shot to give you an idea of how the table will look when finished.

Bistro Update

No pictures today, but I have finished the final sanding of the bistro table. All of the corners have been rounded over and the table is now ready to be finished.

I have practiced my finishing method for the table:
1) shellac - applied to seal the knots to prevent them from bleeding through the paint
2) 1st coat of primer
3) wood filler - to fill any imperfections that become visible after the 1st coat of primer is applied
4) 2nd coat of primer
5, 6 & 7) coat of exterior white latex - a light sanding will be done with 220 grit sandpaper after step 5 and 6.

I'll post pictures again after the shellac has been applied and then again when the table is completed.

1st Contest Entry

I've entered the Bistro Table in the LumberJocks Summer 2007 contest!

This years contest has two categories

garden projects and wood joinery.

With this table project, I've had a concern over how I wanted to attach the top. Considering the top is 36" square, I knew it was going to need a system that allowed the top to be removable (if only to get the table out of the dungeon!).

After some pondering, I came up with a solution that allows for a tool-free removal of the top. Here are a couple pictures of how I achieved that.



so basically what happens, is the top is put on a little off center and is then pushed forward so the little buttons on the underside of the top lock on the little tenons that are attached to the frame. With this solution, I've entered the table in the Wood Joinery category of the LumberJocks contest. The contest runs through the month of July and the winners will be announced after the voting in early August.

Wish me luck!