Completed Segmented Twist

Here's the end result:

I'm hoping it grows on me, but right now... I really don't care for it.

Segmented Twist Fountain Pen

ok, time to reveal the teaser from the other day.

What I've been working on is a new segmented pen. This pen incorporates 234 individual pieces. Correct that, it should incorporate 234 individual pieces.

When trying to complete the second half of the pen, bits went flying all through the workshop... I wasn't to pleased about it, but what can you do. it happens.

here's what I've got:

here's the pen with what's left of the cap:

and just a shot of the cap itself:

the woods are maple, jatoba and walnut.

Pushing for Tuesday

The next Woodturner's Group meeting is coming up on Tuesday. At our last meeting, one of the guys did a demonstration for us on how he constructed his segmented bowls. I'm working on a project that incorporates those methods and I'd like to be able to bring it with me on Tuesday.

I'm pretty sure I have all of the components I need, it's just the detail work in putting it all together. And yes, this is a big tease, as I'm not going to show you anything yet...

A Peek at the Possibilities

Since I started working on the teacher's pen project, I have been thinking more about what else I can do to create more intricate designs for my pens. I also attended a local bowl turners group meeting earlier this week where one of the guys talked about how he makes his segmented bowls. That seemed to kick the old imagination into high gear.

Taking my first step into segementation with smaller pieces, I cut up some maple that I had already planed down to 1/8". I laminated these little pieces with an accent color and turned a sample.

This is what I've got:

This shows me that conceptually I'm on track. Now I need to work on putting together a full sized blank so I can complete a pen and see how it looks.

Each piece of maple is only 1/8" thick. To show the scale, I'm including this picture that has my sample next to a dime. The length of the sample if just over 1 inch. The diameter of the sample is just about 3/8". The final diameter of a slimline pen would be a little bit smaller than this.



Hopefully in the next couple of days I'll have some time to work on putting that full sized blank together.

10 of 13

As of today, I have 10 of the 13 pens completed. The remaining three are ready to be turned. Here's a group shot of the 10.

Teacher Gifts continued

I completed two more of the techer gift pens tonight.

One uses a combination of black walnut and maple

and the other is sapele with maple accents.

I have to admit that I had stopped making slimline pens as I was getting a little bored with them and focused more on the cigar style. I'm happy I took on this task for my wife as it has really proven to me that a slimline doesn't have to be boring.

... now what more can I do???

A Baker's Dozen

My wife asked the other day if I could make a few pens for the teachers at the elementary school our two younger daughters attend. I told her I would do it, but that I wasn't going to "just turn a bunch of pens", I wanted to make something nice if I was going to do it.

I spent much of this past weekend just getting the pen blanks prepped. I've now completed four of the pens. Here's the first one.

I'm pretty happy with how it's come out. I used a new finish technique (CA/BLO) that I haven't used before and I'm quite pleased with the results. To see the others as they are completed, head on over to my other site...

New Sled

As I had mentioned in a previous post, my table saw died recently. One of my friends at work has been nice enough to let me borrow his to work on a few projects. To return the favor, I made him a table saw sled.



Having learned from the first sled I made, I decided I'd make this one a little more flexible. I wanted to make it so none of the great 20.5" x 32.5" space was wasted by attaching guide blocks in the middle of the sled. So I made a sub-assembly.



a couple of spring clamps hold the sub-assembly in place and now it's set to make some more segemented / laminated pen projects!



I hope he likes it as much as I do!!

Happy Birthday Nanny!

My mother-in-law had commented how much she liked the cabinet unit I made for my wife's cookie sheets, so for my mother-in-law's birthday, we decided something should be done about the cupboard in her pantry. There were a couple of"shelves" in there already, and by "shelves" I mean a couple boards that technically were holding a few things up.

So my wife and I pulled everything out of the cupboard, discussed possible solutions and took some measurements. Then I got to work.

Here's a look at what it looks like now:






I made this in three separate units (left side, center and right side) to make it a little easier to build and install. Other than building square components to go in an area that isn't square, everything went along quite smoothly. And best of all, my mother-in-law is very happy!

All three units are built with pine harvested locally by my brother-in-law. I sanded with 100 grit and then applied a BLO (Boiled Linseed Oil) finish. And here's one final picture to give a little perspective:

The Final Step

The final step of the transformation from rough piece of wood to finished piece is a healthy coat of BLO (Boiled Linseed Oil). After the assembly of part 2 of the current project, here is what our original board looks like now.

the Continued Transformation

My last post showed how a piece of pine being used in my current project looks before I start working on it.

After running the board through the planer and jointer, it then looks like this:


The planer gets rid of the nasty looking rough surface and leaves what resembles a typical looking board.

This typical looking board is then glued to another typical looking board to create a wider typical looking board. When that wider typical looking board is sanded, it looks more like this:


stay tuned as progress continues...

New Project - Teaser

One of the reasons I like this hobby is the amazing changes that my materials go through to get to the finish line.

I have a new project in the works. Here's a picture of some of the material before I get started on it.



stay tuned to what happens next. I'm pushing to get this project done for this weekend.

How Much is "Enough"?

My wife asked me this question tonight: "Don't you have enough"?

Of course she was referring to my announcement that I was headed out to see if I could get some more of that Baltic Birch scrap wood from the local furniture shop.
My answer was simple, it was: "No"

so I ask you... how much is enough when it comes to free scraps of Baltic Birch plywood? The first picture in this group is what I picked up in this trip.











I still think the answer is no...

Sharpening Jig

Since I started turning almost two years ago I’ve thought I could learn to sharpen my gouges freehand…

I can’t.

I’m also to cheap to buy one of those commercial style jigs.

Based on a design that I cannot remeber which forum I found it in (otherwise I would be happy to link and apply credit) here’s what I’ve done. I started with a little raised base (made from some of that free scrap baltic birch plywood I can’t stop collecting) and then simply added a little extension with a “V” block to allow the handle a comfortable resting place.

I was SHOCKED at how well this cleaned up my gouge. I should have done this a LONG time ago!

Kitchen Containment

I started this project quite some time ago. This past weekend I finally got it put into place. I do need to pull it down at some point to apply a stain a poly finish to make it match the other cabinets, but for now it is serving it's purpose.



The purpose is for saving my wife's life.
We had been storing her cookie sheets and cooling racks up above the little range hood / vent thing over our stove. Everything that was up there just seemed to have a way of becoming entangled like velcro, causing everything to come crashing down if you didn't use three hands to remove something!

There is peace at last!

R.I.P.

Yes there was a death today.

My little Ryobi $99 tablesaw rolled over and died tonight. I was 3/4 the way through a cut on a piece of walnut for some new cutting boards and the flash of sparks coming from the motor caught my attention!

Poor thing.

Untitled

This is something that I came up with over the weekend. The dots at the top are inlays (meaning they do not show through to the other side of the pen). The single stripe running the length of the lower barrel is also an inlay where the three shorter stripes run all the way around the pen.

Here's a picture to show the flip side of the pen.

Make that a Double

I worked on a couple of pen designs this weekend. The first is an expansion of the celtic knot done last week. This time around I went with the double knot design. I used soft maple as the accent wood on the Sapele base.

Knots - His and Hers

I like the size and feel of the cigar pen.

My wife prefers the slim line.

As I mentioned in the previous post I have made my first Celtic Knot pen. I actually made two at the same time. One Cigar and one Slimline.
his and hers

her knot

his knot

and yes, there are more in the works!

Let's Get Jiggy

I typically believe that if someone throws something away, they are doing it for a reason. I have heard also that one man's trash is another man's treasure.

I have known that there is a local furniture company about a block away from my house. I have also heard that their cut-offs are available for the taking. This past Sunday I found out what I've been missing, and I can assure you it won't happen again!!

Here is the haul I brought home Sunday

I have already begun using one of those longer strips in the back as a raised bed in my planer so I can make my thin strips used in the celtic knot pens. There are plenty more jigs and projects just waiting to come out of that pile...